|
|
|
|
|
|
Behringer HA4700 POWERPLAY PRO Headphone Amp
|
|
|
The Behringer HA4700 Powerplay Pro has 4 quiet, powerful channels that drive loads down to 8 ohms. This headphone amp offers improved sound performance, comprehensive signal routing, and mixing functions. Each section has mono/stereo operation, balancing, left/right mute, LED output meter, high and low EQ, balance, and volume controls. One rackspace. Servo-balanced, gold-plated XLR and 1/4" TRS I/O include 3 headphone outputs per channel, 2 XLR and 2 - 1/4" TRS inputs, and 2 XLR and 2 - 1/4" TRS outputs. Frequency response: 10Hz-150kHz, ±3dB. Signal-to-noise ratio: 22Hz-22kHz >90dB @ 0dBu. Dynamic range: 22Hz-22kHz: 110dB; THD: 0.006%.
|
|
|
|
|
|
|
|
|
|
Behringer HA8000 8-Channel Headphone Amplifier
|
|
|
This professional, high-power multi-purpose 8-channel headphone amp features 8 totally independent stereo high-power amplifier sections in 1 rack space, 2 separate main inputs, 2 headphone outputs per channel and even a dedicated direct input for each channel. It offers the highest sonic quality with virtually all types of headphones even at maximum volume. All 1/4 in. TRS connectors.
|
|
|
|
|
|
|
|
|
|
DOD SR460H Headphone Amp
|
|
|
The SR460H is our headphone distribution amplifier. It accepts a stereo source which can be connected on the front, or rear panel, and delivers the signal to 6 headphone outputs. Each channel has its own level control and there is an overall master level. The SR460H has an “auto ramp” start up to protect your eardrums from the 1 watt of power delivered to each headphone output.
|
|
|
|
|
|
|
|
|
|
Aviom A16D A Net Distribution Hub
|
|
|
A-16D is designed to distribute the A-Net Signal from either an A-Net input module or another A-Net Distributor. Each A-16D accepts one A-Net input signal and provides eight simultaneous A-Net outputs using Category-5 Cables. The A-16D Distributor eliminates the need to daisy-chain A-Net devices, simplifying stage and studio setups.
|
|
|
|
|
|
|
|
|
|
Aviom A16CS Control Surface for A16R Monitor Mixer
|
|
|
The A-16CS Control Surface allows the A-16R Monitor Mixer to be mounted in a rack with power amps, wireless transmitters, etc., while allowing the performer to have complete control over the 16 channels of audio in the monitor mix.
|
|
|
|
|
|
|
|
|
|
Aviom A16II 16 Channel Monitor Mixer
|
|
|
The A-16II Personal Mixer is an updated version of the original A-16 Personal Mixer, part of the Personal Monitor Mixing System. The A-16II Personal Mixer features newly designed higher voltage and higher current output circuitry. The new output design allows even high impedance headphones to be driven louder and cleaner. It also provides cleaner transient response to the entire range of output devices. A new plug auto-detect circuit at the output determines whether the device plugged into the A-16II’s audio out jack is mono or stereo. This prevents shorting out one side of the mixer’s stereo output electronics and makes it easier for the user to implement mono devices with the Personal Monitor Mixing System. When a mono plug is detected in the output jack, the circuit automatically pans the right channel information so that the individual channel balance remains accurate.
|
|
|
|
|
|
|
|
|
|
Aviom AN16i Input Module
|
|
|
The AN-16/i Input Module is a single rack space unit that serves as the A/D input for the digital snake. The AN-16/i can also be used as the analog input module for a personal monitoring system. It converts sixteen line level analog audio channels into uncompressed, full bandwidth digital data transmitted via Aviom's proprietary A-Net protocol. All inputs are balanced 1/4" TRS jacks. There is a Thru jack available for each input, which allows the AN-16/i Input Module to be inserted into an existing audio signal path.
|
|
|
|
|
|
|
|
|
|
Aviom AN16O Output Module
|
|
|
The AN-16/o Output Module is a 1U rack-mount D/A converter. Coupled with an AN-16/i, the AN-16/o creates a 16-channel digital snake over Cat-5 cable. As with Aviom's other A-Net devices, the cable lengths can be up to 500 feet long between devices.
|
|
|
|
|
|
|
|
|
|
Furman HRM16 Remote Mixer for the HDS-16/HRM-16 Headphone/Audio Distribution System
|
|
|
The HRM-16 Remote Mixer for the HDS-16/HRM-16 Headphone/Audio Distribution System may either attach to a mic stand with the included mic stand clip and hardware, or be placed on a table or shelf. The unit requires no external power, and allows full volume/low distortion headphone mixes to be created on the fly
|
|
|
|
|
|
|
|
|
|
Furman HR-2 2-channel Headphone Remote Box
|
|
|
The compact HR-2A Headphone Remote Station is a passive headphone box that provides two headphone jacks, each with its own volume control. The HR-2 clamps to any microphone stand using included hardware. Any number of HR-2's may be connected to a Furman HA-6A or SP-20A Headphone Amplifier by daisy-chaining with standard XLR/XLR microphone cables, or, with the use of an adaptor, to any power amp.
|
|
|
|
