|
|
|
|
|
|
Furman HRM16 Remote Mixer for the HDS-16/HRM-16 Headphone/Audio Distribution System
|
|
|
The HRM-16 Remote Mixer for the HDS-16/HRM-16 Headphone/Audio Distribution System may either attach to a mic stand with the included mic stand clip and hardware, or be placed on a table or shelf. The unit requires no external power, and allows full volume/low distortion headphone mixes to be created on the fly
|
|
|
|
|
|
|
|
|
|
Furman HR-2 2-channel Headphone Remote Box
|
|
|
The compact HR-2A Headphone Remote Station is a passive headphone box that provides two headphone jacks, each with its own volume control. The HR-2 clamps to any microphone stand using included hardware. Any number of HR-2's may be connected to a Furman HA-6A or SP-20A Headphone Amplifier by daisy-chaining with standard XLR/XLR microphone cables, or, with the use of an adaptor, to any power amp.
|
|
|
|
|
|
|
|
|
|
Furman HDS-16 16-Channel Headphone / Audio Distribution System
|
|
|
With the TEC-award-winning HDS16 Headphone/Audio Distribution System, every artist in the studio or on stage can have a custom headphone/monitor mix without any adjustments at the board! The HDS-16 cleanly routes 8 mono and 4 stereo signals to remote mixing locations. A unique talkback system allows each user to communicate with other users and the main mixing location. The two rackspace HDS-16 provides full patching functions on its front panel via 1/4" and "TT" input jacks. The unit provides power and signal conditioning to drive up to eight HRM-16 Remote Mixers. In addition, it includes two 1/4" jacks for the two way talkback functions, and a Solo Remote function.
|
|
|
|
|
|
|
|
|
|
Furman HA-6AB Headphone/Monitor Amplifier
|
|
|
The HA-6AB Headphone/Monitor Amplifier from Furman is a unique combination of a headphone amp and a conventional power amp. This combination of functions can save the expense of an extra power amp in many recording studios.
|
|
|
|
|
|
|
|
|
|
Furman Sound SP-20AB Power Amplifier
|
|
|
The SP-20AB Stereo Power Amplifier is a unique and economical 20 watt per channel stereo amplifier provided the load is 8 ohms (not recommended to use less than 8 ohms in stereo mode). Its toroidal transformer delivers ultra-quiet performance, making it ideal for recording studio applications. The SP-20A may be operated in any of three modes as selected by a rear-panel switch: normal stereo, two channel mono, or single channel (bridged) mono. The latter mode allows a power output of 30 watts provided the load is 16 ohms (not recommended to use less than 16 ohms in bridged mode).
|
|
|
|
