 |
 |
 |
 |
| The frequency response and cardioid pick-up pattern are optimised for drum sets and other percussion instrument miking, while also producing exceptional results on all forms of brass and woodwind. An integral stand mount screws directly onto mic stands and included clip attaches mic to rim of drum. |
|
 |
 |
|
 |
 |
 |
 |
 |
Features
- Very high sound pressure level handling, in excess of 160dB, is combined with a balanced, clear, low distortion signal similar to a high-end studio condensor microphone. Lightweight voice coil provides extended high frequency and rapid transient response. A tough, reinforced glass fibre body takes the knocks and shocks and suppresses impact noise.
- Now includes a 10-year warranty!
- Technical Info
- Frequency response: 40Hz...18kHz
- Transducer principle: Pressure gradient receiver
- Pickup pattern: Cardioid
- Front-to-back-rejection at 1kHz at 120 degrees: >25dB
- Sensitivity (free field, no load) 1kHz:
- 1.8mV/Pa = -55dB (0dB=1V/Pa)
- 1.8mV/Pa = -75dB (0dB=1V/mbar) (USA)
- Nominal impedance at 1kHz: 350 ohms
- Min. terminating impedance: 1000 ohms
- Sensitivity to magnetic field at 50Hz: 1 µV/µT
- Weight: 60 g
- Dimensions: ø 33 x 59mm
|
|
 |
 |
 |
 |
|
 |

|