 |
 |
 |
|
| A comprehensive first step into professional wireless, Performance Gear Wireless Systems are engineered to the same uncompromising quality standards as PGX, SLX, ULX and UHF-R wireless. Marrying superior sound quality and stage-proven endurance with advanced features like Internal Antenna Diversity and frequency selectability, Performance Gear Wireless fulfils the promise of independent, confident performance in freedom from the wire. |
|
|
|
|
|
 |
|
 |
|
Features
- Reliable wireless performance
- Up to 8 compatible systems (across multiple bands)
- Shure's patented Predictive Diversity ensures continuous reception
- Confident, portable setup
- Internal Antenna
- First in the industry
- Internal 1/4 wave antennas minimize poor positioning and breakage
- Durable construction
- Superior sound quality
- Variable companding ratio for clear sound
- 80 years of microphone expertise
- PG185 Condenser Lavalier Microphone
- Clothing clip for secure placement
- Acoustic windscreen minimizes wind noise in outdoor applications
- PG2 Handheld Transmitter
- Power, mute and battery status LED
- Power and mute switch
- 9V battery (included) provides 8 hours of battery life
- 75m (250 ft.) operating range
- PG88 Dual Receiver
- Internal Antenna Diversity
- Dual receiver with up to 10 selectable channels per side
- 4 compatible dual receivers
- 1/4 in. and XLR output
- PG1 Bodypack Transmitter
- Power, mute and battery status LED
- Power and mute switch
- 9V battery (included) provides 8 hours of battery life
- 75m (250 ft.) operating range
- Technical Info
- System
- Working Range: 75m (250 ft.) Note: actual range depends on RF signal absorption, reflection, and interference.
- Audio Channel Response: Minimum: 45 Hz. Maximum: 15 kHz (overall system channel depends on microphone element).
- Total Harmonic Distortion: 0.5%, typical Ref. +/- 33 kHz deviation, 1 kHz tone
- Dynamic Range: >100 dB A-weighted, typical
- Operating Temperature Range: -18 degreesC (0 degreesF) to +57 degreesC (+135 degreesF) Note: battery characteristics may limit this range
- Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
- PG1 Bodypack Transmitter
- Audio Input Level: -10 dBV maximum at "mic" gain position +10 dBV maximum at 0dB gain position +20 dBV maximum at -10dB gain position
- Gain Adjustment Range: 30 dB
- Input Impedance: 1M ohm
- RF Transmitter Output: 10 mW typical (dependent on applicable country regulations)
- Dimensions: 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.)
- Weight: 75 grams (2.6 oz.) without battery
- Housing: Molded ABS
- Power Requirements: One 9V alkaline or rechargeable battery
- Battery Life: >8 hours (alkaline)
- PG2 Handheld Transmitter
- Audio Input Level: +2 dBV maximum at -10dB position -8 dBV maximum at 0dB position
- Gain Adjustment Range: 10dB
- RF Transmitter Output: 10 mW typical (dependent on applicable country regulations)
- Dimensions: 223.52 L x 53.34 Dia. (8.8 in. x 2.10 in.)
- Weight: 218 grams (7.7 oz.) without battery
- Housing: Molded ABS handle and battery cup
- Power Requirements: One 9V alkaline or rechargeable battery
- Battery Life: >8 hours (alkaline)
|
|
|
 |
|
 |
|
|
|
