Bag End INFRA-MX2 2-Channel Loudspeaker Controller

Product Description

The Bag End INFRA-MX2 system module is a two channel loudspeaker controller. It is designed for either stereo 2-way operation with a mono sum INFRA low frequency output or mono 3-way operation. The INFRA-MX2 incorporates the INFRA dual integrator, frequency dividing, and system protection in an easily operated configuration where the system parameters are internally preset or available on front panel rotary controls.

Applications

• Portable Sound Systems
• Cinema Reproduction
• Auditorium Sound Systems
• Church Sound Systems
• Theatrical Production
• Nightclub Applications
• Musical Instrument Systems

Bag End INFRA-MX2 System Module Features:

• 18 Hz INFRA dual integrator
• CVR hi-pass limiting
• INFRA Dynamic Filter
• Balanced inputs
• Internal frequency modifications
• Convenient front panel controls
• 2-way stereo or 3-way mono mode

General Specifications

• Input Connectors: XLR female
• Input Configuration: Balanced
• Alternate Input Configuration: Unbalanced
• Maximum Input Signal: 5V (+16 dBu)
• Output Connectors: XLR male
• Output Configuration: Unbalanced
• Maximum Output Signal: 3 V (+10 dBu)
• Nominal Output Impedance: 100 Ohms
• Minimum Suggested Load Impedance: 2.5 kOhms
• Power-on Indication: Green LED
• Operating Input Voltage: 12 - 15 VDC
• Operating Current Required: 200 mA
• Input Voltage Connector: Miniature DC 2.5 mm
• Input Voltage Polarity: Center pin +

INFRA Specifications

• Maximum INFRA Gain: 10 dB
• Maximum INFRA Attenuation: 10 dB
• INFRA Cutoff Frequency Programming: Plug in resistors
• INFRA Cutoff Frequency: 8 Hz to 40 Hz, Factory Set 18 Hz
• INFRA Output Mode: Sum in Stereo Mode
• Nominal Dynamic Filter Threshold: 0 dBu Output
• Minimum Dynamic Filter Threshold: -10 dBu Output
• Maximum Dynamic Filter Threshold: +10 dBu Output
• Maximum Dynamic Filter Reduction Capability at 18Hz: 30 dB
• Dynamic Filter Threshold Exceeded Indication: Red LED
• INFRA Circuit Noise: < -90 dBu (20 Hz to 20 kHz)
• INFRA Dynamic Range: >105 dB (20 Hz to 20 kHz) (bandwidth unweighted)

Hi Pass Specifications

• Maximum Hi Pass Gain: 10 dB
• Maximum Hi Pass Attenuation: 10 dB
• Hi Pass Filter Frequency Programming: Plug in resistors
• Factory Set Hi Pass Filter Frequency: - 3 dB @ 130 Hz/-6 dB @ 97 Hz
• Hi Pass Filter Frequency Range: 50 Hz to 200 Hz
• Hi Pass Filter Slope: 12 dB/octave
• Hi Pass Circuit Noise: < -90 dBu (20 Hz to 20 kHz)
• Hi Pass Dynamic Range: > 105 dB (20 Hz to 20 kHz) (bandwidth unweighted)

Physical Specifications

• Enclosure: Black powder coated steel
• Enclosure Mounting: 1U EIA rack (1.75")
• Dimensions: 1.75"h x 19"w x 5.25"d (5 cm x 49 cm x 14 cm)
• Weight: 5 lbs. (2.3 kg)