Bag End PTA2000-I 2-way Powered Installation Speaker

Product Description

The P-TA2000-I is a permanent installation full range self powered loudspeaker system offering both high fidelity and high efficiency. The Time-Aligned™ studio quality sound provides detail and clarity not found in other designs. Rugged birch plywood enclosure finished with our beautiful utility black textured finish and a black steel grille will fit nicely into almost any application. Optional flying attachment points allow for safe and convenient rigging.

Bag End P-TA2000-I Features:

• Enclosure: 18 mm 13-ply birch plywood
• Low Frequency Transducer: 12" Cone, 2.5" Voice coil,80 oz. Magnet
• High Frequency Transducer: 1" Exit compression driver, 1.8" Titanium diaphragm, 15 oz. Magnet
• Internal Amplification: 1- Minima One
• Grille: 16 Gauge black vinyl, coated perforated steel
• Optional Hardware: Rigging points
• System Type: 2-way vented 2 cu. ft.
• Input: 10K Ohms Balanced XLR inputs with loop through
• Input CAL Sensitivity: ±4 dBu
• System Power: 500 W continuous
• Frequency Response: 70 Hz to 20 kHz ±3 dB (4 piSteradians)
• Hi Pass Filter Frequency Switchable: -6dB @ 8 Hz, @50 Hz, @ 95 Hz
• Dispersion: 80° Horizontal (-6 dB), 60° Vertical (-6dB)
• Horn may be rotated 90° for a 60° H x 80° V dispersion
• Crossover Network: Passive Time-Align equalizer typeat 2.5 kHz
• Time Offset Between Drivers: < +/- 25 Microseconds
• Maximum Acoustic Output: Half Space @ 1 Meter, 127dB SPL
• LED Indicators: On (Green), System Limit (Yellow), System Fault or Sleep Mode (Red)
• AC Power Requirements: 88 Volts Minimum, 270 Volts Maximum
• Finish: Black textured finish
• Shape: Trapezoidal, 11° taper per side
• Dimensions (H x W x D): 21" x 17" x 18" (54 x 44 x 46 cm)
• Weight: 55 lbs. (25 kg)