Shure PGX24/SM86 Handheld Wireless System

Product Description

Includes one PGX2/SM86 Handheld Transmitter and one PGX4 Diversity Receiver. This system delivers studio quality sound and is ideal for lead and backup vocals.

System

Working Range

100m (300 ft.)
Note: actual range depends on RF signal absorption,reflection, and interference

Audio Frequency Response
+/– 2 dB
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.

Total Harmonic Distortion
Ref. +/– 33 kHz deviation, 1 kHz tone
0.5%, typical

Dynamic Range

>100 dB A-weighted

Operating Temperature Range
–18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.

PGX1 BodypackTransmitter

Audio Input Level

–10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at –10dB gain position

Gain Adjustment Range

30 dB

Input Impedance

1 MΩ

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded polycarbonate case

Power Requirements

2 “AA” size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

PGX2 Handheld Transmitter

Audio Input Level

+2 dBV maximum at –10dB position
–8 dBV maximum at 0dB position

Gain Adjustment Range

10dB

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions including SM58 cartridge
254 mm x 51 mm dia. (10 x 2 in.)

Weight

290 grams (10.2 oz.) without batteries

Housing

Molded PC/ABS handle and battery cup

Power Requirements

2 “AA” size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

PGX4 Receiver

Dimensions

40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)

Weight

327 g (11.5 oz.)

Housing

 ABS

Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): –19 dBV
1/4 inch connector (into 3000 Ω load): –5 dBV

Output Impedance

XLR connector: 200 Ω
1/4 inch connector: 1kΩ

XLR output

Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio

Sensitivity

–105 dBm for 12 dB SINAD, typical

Image Rejection

>70 dB, typical

Power Requirements

12–18 Vdc at 150 mA, supplied by external power supply